Medium duty tool tensions and seals stainless steel or galvanized 5/8" (16 mm) wide centre punch pre-formed clamps.
Unit of Measure


Shipping Weight

N/A 3 lb1.4 kg

Carton Dimensions

N/A 14 x 4 x 4 in360 x 100 x 100 mm


N/A 5/8 in16 mm


N/A Steel

Industry Served

N/A Electric Utility Plumbing & HVAC

Features and Benefits

All Steel Tools

N/A Durable, long lasting

Lever Action

N/A Easy to use

PT Adapt - Optional Adapter for 3/8 Inch (in) Width Clamps

N/A Easy to fit onto tool

To Tension Clamps

To Tension Clamps

N/A Raise the anvil head. Push the ball handle forward to open the slot in the tool nose. Insert the tail of the clamp through the slot in the tool nose. Slide the tool forward so that the nose approaches the seal. Work the ball handle back and forth to draw the clamp tail and push the seal. When clamp is tight, flip the anvil down and strike the top of it twice with a hammer to punch and secure the seal. To cut the tail, lever the whole tool back and forth. To release the cut tail, push the ball handle forward to open the slot in the tool nose and extract the cut-off tail.