Medium duty tool tensions and cuts stainless steel banding widths from 1/4" (6 mm) to 3/4" (19 mm) and thicknesses from 0.015" (0.4 mm) to 0.030" (0.7 mm) Use with BNG, BSB, BSBLD and coated banding.
Unit of Measure


Carton Dimensions

N/A 12 x 3 x 2 in300 x 75 x 50 mm

Banding Width

N/A 1/4 to 3/4 in6 to 19 mm

Banding Thickness

N/A 0.015 to 0.030 in0.4 to 0.7 mm

Industry Served

N/A Electric Utility Oil & Gas & Mining Plumbing & HVAC Shipbuilding & Marine Sign & Banner

Features and Benefits

All Steel Tools

N/A Durable, long lasting

Ratchet Wheel Tensioning

N/A Tensions in discreet increments for good control

Lever Handle

N/A Easy to use
Two dimensional motion for tension and cut

Hammer Knob

N/A Separate hammer not required



N/A Banding

To Tension Banding

To Tension Banding

N/A Insert the end of the banding through the slot in the tool nose and through the slot in the mandrel. Slide the tool forward so that the nose approaches the buckle or wing seal. Push and pull the handle back and forth to turn the mandrel and draw the banding through the buckle. When the banding is tight, rotate the tool over the buckle or wing seal. Push the lever forward to cut the banding. Use the knob opposite winding mandrel as a hammer head to tap down ears of buckles or wing seals.