Light to Medium duty tool tensions stainless steel banding or steel strapping with widths from 1/4" (6 mm) to 3/4" (19 mm) and thicknesses from 0.015" (0.4 mm) to 0.020" (0.5 mm) Use with BSBLD series stainless steel banding or steel strapping and steel or stainless steel seals or wing seals.
Unit of Measure


Shipping Weight

N/A 3 lb1.4 kg

Carton Dimensions

N/A 10 x 6 x 3 in26 x 150 x 75 mm


N/A 1/4 to 3/4 in6 to 19 mm


N/A 0.015 to 0.020 in0.4 to 0.5 mm


N/A Steel

Industry Served

N/A Plumbing & HVAC

Features and Benefits

All Steel Tools

N/A Durable, long lasting, use same tool for stainless steel banding and steel strapping

Squeeze Handle, Ratchet Wheel and Push Bar

N/A Easy to use
One hand operation

To Tension Banding

To Tension Banding

N/A Insert the tail of the banding through the slot in the tool nose and between the gripper plate and gripper lever. Slide the tool forward so that the nose approaches the seal or wing seal. Squeeze the handle to draw the banding through the seal or wing seal. When the banding is tight, rotate the tool over the seal or wing seal. Cut the banding. To remove the cut-off tail, pull it through the gripper.