• 1/2 Inch (in) APB4 All Purpose Stainless Steel Banding

    All Purpose band is stainless steel banding with pre-punched holes.

    12mm (1/2") x 0.76mm (0.030") x 25m (82.5') Type 316 stainless steel with 5mm (3/16") diameter holes at 15cm (19/32") centres. Sold per coil in self-dispensing cartons.

    To Fasten APB4 - Fit the APB4 band around the objects to be fastened and form a loop. Cut off. Match holes in both sides of the loop at the desired position. Insert 5mm (3/16") bolt(s) through the holes and tighten nuts to secure.

    To View All Available Sizes, Please Click Link

  • Heavy Duty Type 201 Stainless Steel Banding

    Extra strong, type 201 stainless steel banding is suitable for general banding e.g., fasten signs, signals, control boxes and other fixtures to poles, columns, pillars or beams.

    To View All Available Sizes, Please Click Link

  • Type 316 Stainless Steel Banding

    Type 316 stainless steel banding is suitable for bundling and fastening applications in marine and other corrosive environments.

    To View All Available Sizes, Please Click Link

  • 600 Pound (lb) Tensile Strength and 100 Feet (ft) Coil Length Light Duty Type 304 Stainless Steel Banding

    Light Duty, type 304 stainless steel banding is suitable for general light and medium duty banding e.g., fasten small signs, wires, sensors, controls, insulation jackets to poles, pipes, columns, pillars, beams or tanks.

    To View All Available Sizes, Please Click Link

  • BT2440 Squeeze Action Band Tensioning Tool with Cutter

    Squeeze action tool tensions and cuts stainless steel banding or steel strapping widths from 1/4" (6 mm) to 3/4" (19 mm) and thicknesses from 0.015" (0.4 mm) to 0.030" (0.7 mm). Slots in nose and mandrel are 0.07" (2 mm) to accommodate coated banding. Use with BSBLD stainless steel banding and PPA316 or PVC316 series coated stainless steel banding.

    To View All Available Sizes, Please Click Link

  • 150 Pound (lb) Type 316 Stainless Steel Ball-Lock Cable Ties

    Standard stainless steel cable ties are suitable for general cable bundling, general fastening, attaching metal tags and labels.

    To View All Available Sizes, Please Click Link

  • 300 Pound (lb) Type 316 Stainless Steel Ball-Lock Cable Ties

    Heavy duty stainless steel cable ties are suitable for general cable bundling, general fastening, attaching metal tags and labels.

    To View All Available Sizes, Please Click Link

  • 150 Pound (lb) Type 304 Stainless Steel Ball-Lock Cable Ties

    Standard stainless steel cable ties are suitable for general cable bundling, general fastening, attaching metal tags and labels.

    To View All Available Sizes, Please Click Link

  • 300 Pound (lb) Type 304 Stainless Steel Ball-Lock Cable Ties

    Heavy duty stainless steel cable ties are suitable for general cable bundling, general fastening, attaching metal tags and labels.

    To View All Available Sizes, Please Click Link

  • 450 Pound (lb) Type 316 Stainless Steel Ball-Lock Cable Ties

    Extra heavy duty stainless steel cable ties are suitable for general cable bundling, general fastening, attaching metal tags and labels.

    To View All Available Sizes, Please Click Link

  • 800 Pound (lb) Type 316 Stainless Steel Ball-Lock Cable Ties

    Double extra heavy duty stainless steel cable ties are suitable for general cable bundling and general fastening, where extra strength is required.

      To View All Available Sizes, Please Click Link

  • CT2840 Stainless Steel Cable Tie Tensioning Tool with Auto Cut-Off

    Pistol-Grip tool tensions and automatically cuts stainless steel cable ties with widths from 4.6mm (0.18") to 7.9mm (0.31") and thicknesses to 0.25mm (0.01"). Pre-set a desired tension level, and tool automatically tensions and cut-off tail at pre-set level.

    Use with KSS, KSSH, KSSLT/7 series stainless steel cable ties.

    To View All Available Sizes, Please Click Link

  • CT2850 Stainless Steel Cable Tie Tensioning Tool with Cutter

    Squeeze-action tool tensions and cuts stainless steel cable ties with widths from 4.6mm (0.18") to 12.5mm (1/2") and thicknesses from 0.25mm (0.01") to 0.35mm (0.02")

    Use with KSS, KSSH, KSSXHD, KSSLT series stainless steel cable ties.

    To View All Available Sizes, Please Click Link

  • H100 Cutter

    To View All Available Sizes, Please Click Link

  • Regular Duty Dispenser Cart with Brake

    To View All Available Sizes, Please Click Link

  • STS7520020

    Regular Duty steel strapping is suitable for general bundling and unitizing both rectangular surfaced and irregularly shaped objects, e.g. cartons, crates, pipe, tubing, bails, etc.

    To View All Available Sizes, Please Click Link

  • ESK-01 Econo Field Strapping Kit

    Squeeze-action tool tensions and cuts stainless steel cable ties with widths from 4.6mm (0.18") to 12.5mm (1/2") and thicknesses from 0.25mm (0.01") to 0.35mm (0.02")

    Use with KSS, KSSH, KSSXHD, KSSLT series stainless steel cable ties.

    To View All Available Sizes, Please Click Link

  • Ideal Tridon® Strapbinder® - Smooth-Seal™ Centre Punch Pre-Formed Hose Clamps

    To select the proper size, measure the outside diameter of the hose with the fitting inserted. Choose the next larger inside diameter clamp.

    To fasten, use PT2680 Centre Punch tool.

    To View All Available Sizes, Please Click Link

  • Ideal Tridon® Strapbinder®-Smooth-Seal™ Centre Punch Pre-Formed Type 201 Stainless Steel Hose Clamps

    To select the proper size, measure the outside diameter of the hose with the fitting inserted. Choose the next larger inside diameter clamp.

    To fasten, use PT2680 Centre Punch tool.

    To View All Available Sizes, Please Click Link

  • Ideal Tridon® Strapbinder®-Smooth-Seal™ "J" Series Pre-Formed Hose Clamps

    To select the proper size, measure the outside diameter of the hose with the fitting inserted. Choose the next larger inside diameter clamp.

    To fasten, use MTC2400 tool with "J" Series clamp tool adapter.

    To View All Available Sizes, Please Click Link

  • Ideal Tridon® Strapbinder® - Smooth-Seal™ "J" Series Pre-Formed Type 201 Stainless Steel Hose Clamps

    To select the proper size, measure the outside diameter of the hose with the fitting inserted. Choose the next larger inside diameter clamp.

    To fasten, use MTC2400 tool with "J" Series clamp tool adapter

    To View All Available Sizes, Please Click Link

  • P173 "T" Handle Strap Tensioning Tool with Cutter

    Light duty tool tensions and cuts polypropylene and fibre strapping when used with wire buckles.

    To View All Available Sizes, Please Click Link

  • 54112 1/2 Inch (in) Width All Purpose Banding

    Galvanized All Purpose steel banding with pre-punched holes. Use it for general bundling, fastening and hanging applications.

    12 mm (1/2") x 0.7 mm (0.030") with 5 mm (3/16") diameter holes at 14 mm (9/16") centers.

    Spool dispenser of 10 m (33') sold per coil in plastic dispensers

    To View All Available Sizes, Please Click Link

  • PB2100 Push-Bar Tensioning Tool

    Light to Medium duty tool tensions stainless steel banding or steel strapping with widths from 1/4" (6 mm) to 3/4" (19 mm) and thicknesses from 0.015" (0.4 mm) to 0.020" (0.5 mm) Use with BSBLD series stainless steel banding or steel strapping and steel or stainless steel seals or wing seals.

    To View All Available Sizes, Please Click Link

  • HS 54116 5/8 Inch (in) Width Hanger Straps

    5/8" (17 mm) x 0.028" (0.7 mm) with 17/64" (7 mm) diameter holes at 13/16" (20 mm) centers

    33 ft (10 m) on self-dispensing plastic spool - 6" (150 mm) diameter X 1" (25 mm), wt 1.6 lbs (0.72 kg)

    To View All Available Sizes, Please Click Link

  • PT2680 Punch Tensioning Tool

    Medium duty tool tensions and seals stainless steel or galvanized 5/8" (16 mm) wide centre punch pre-formed clamps.

    To View All Available Sizes, Please Click Link

  • RTS2230 Ratchet Banding Tool with Cutter

    Medium duty tool tensions and cuts steel or stainless steel banding widths from 1/4" (6 mm) to 3/4" (19 mm) and thicknesses from 0.015" (0.4 mm) to 0.030" (0.7 mm) Use with BNG, BSB, BSBLD, PPA316 and PVC316 series stainless steel banding, and with steel strapping.
    Use for flat or irregular surface applications

    To View All Available Sizes, Please Click Link

  • RTS240 Ratchet Banding Tool with Cutter

    Medium duty tool tensions and cuts steel or stainless steel banding widths from 1/4" (6 mm) to 3/4" (19 mm) and thicknesses from 0.015" (0.4 mm) to 0.030" (0.7 mm) Use with BNG, BSB, BSBLD, PPA316 and PVC316 series stainless steel banding, and with steel strapping.
    Use for flat or irregular surface applications

    To View All Available Sizes, Please Click Link

  • HTC6000 Heavy Duty Banding Tool with Cutter

    Heavy duty tool tensions and cuts stainless steel banding widths from 1/2" (13 mm) to 1-1/4" (32 mm) and thicknesses from 0.020" (0.5 mm) to 0.044" (1.1 mm)
    All steel construction. Use for heavy duty banding or when extra tension is required.

    Use with BSBHD series stainless steel banding.

    To View All Available Sizes, Please Click Link

  • C3124-sealer

    To View All Available Sizes, Please Click Link

  • HTOOL Hook Tool Tensioners

    "T" - Handle manual pull tool for tensioning stainless steel cable ties with hole in the tail

    Use with KSSLT series stainless steel cable ties.

    To View All Available Sizes, Please Click Link

  • 250 Pound (lb) Stainless Steel Ladder Style Cable Ties

    Standard stainless steel ladder style cable ties are suitable for general cable bundling, general fastening, attaching metal tags and labels.

    To View All Available Sizes, Please Click Link

  • 0.57 and 0.81 Inch (in) Inner Diameter Width Stainless Steel Open Strap Seal

    Stainless steel seals are suitable for general bundling and fastening. Use with stainless steel strapping, e.g. for unitizing shipments exposed to corrosive environments; or for fastening insulation jackets.

    To View All Available Sizes, Please Click Link

  • STBT940 Strap Type Banding Ties

    Strap Type Banding Tie is a 940mm strip of stainless steel banding attached to a specially designed stainless steel buckle to provide the strength of a band with the convenience of a cable tie. Use for permanent or temporary bundling or fastening.

    STBT940 – 940mm (37") x 12.7mm (0.5") x 0.38mm (0.015") Type 304 stainless steel with specially designed buckle featuring a close-down locking cover.

    To View All Available Sizes, Please Click Link

  • Heavy Duty Steel Strap Seals - 2

    Heavy duty steel seals are suitable for general bundling and fastening of heavy objects. Use with high tensile steel strapping, e.g. for unitizing shipments.

    To View All Available Sizes, Please Click Link

  • 400 Pound (lb) Stainless Steel Ladder Style Cable Ties

    Standard stainless steel ladder style cable ties are suitable for general cable bundling, general fastening, attaching metal tags and labels.

      To View All Available Sizes, Please Click Link

  • LTC100 Banding Tool with Cutter

    Light duty tool tensions and cuts stainless steel banding with widths from 1/4" (6 mm) to 3/8" (9.5 mm) and thicknesses from 0.010" (0.2 mm) to 0.025" (0.6 mm)

    To View All Available Sizes, Please Click Link

  • MTC2400 Banding Tool with Cutter

    Medium duty tool tensions and cuts stainless steel banding widths from 1/4" to 3/4" and thicknesses from 0.015" (0.4 mm) to 0.030" (0.7 mm)

    Use with BNG, BSB and BSBLD series banding

    To View All Available Sizes, Please Click Link

  • Open Style Standard Duty Steel Strap Seal

    Steel seals are suitable for general bundling and fastening. Use with steel strapping, e.g. for unitizing shipments.

    To View All Available Sizes, Please Click Link

  • Ideal Tridon® Worm Gear Micro-Gear® 62M Hose Clamps

    Micro-Gear® 62M clamps are tiny, tough and precision engineered for use in small hose applications. Their slim 5/16" band and low profile housing make them easy to install in confined areas. Micro-Gear® 62M is an all 300 grade stainless steel marine grade clamp.

    To View All Available Sizes, Please Click Link

  • High Tensile Steel Strapping

    High Tensile steel strapping is suitable for heavy duty bundling and unitizing both flat surfaced objects (e.g. cartons, crates, pallets), and irregularly shaped objects, (e.g. pipe, tubing, bails, etc.).

    To View All Available Sizes, Please Click Link

  • Ideal Tridon® Worm Gear 1/2 Inch (in) Hy-Gear® 67-1 Hose Clamps

    1/2" Hy-Gear 67-1 clamps are suitable for most common household and automotive applications. The bands have clean punched rectangular perforations that hold strong and connect easily.

    To View All Available Sizes, Please Click Link

  • Ideal Tridon® 30011 Heavy Duty T-Bolt Hose Clamps

    T-Bolt 30011 clamps provide uniform sealing pressure for a positive, reliable seal. Designed for use in high vibration and large diameter applications common in heavy trucks, industrial machinery, off-road equipment, agricultural irrigation and machinery. Features a 3/4" or 7/8" wide stainless steel band, depending upon size ordered, and welded construction for reliability.

    To View All Available Sizes, Please Click Link

  • Ideal Tridon® Worm Gear 9/16 Inch (in) Hy-Gear® 68-0 Hose Clamps

    9/16" Hy-Gear® 68-0 is an all stainless steel clamp with a 5/16" hex-head screw and is especially suited for industrial applications.

    To View All Available Sizes, Please Click Link

  • oscillating coil

    Regular Duty steel strapping is suitable for general bundling and unitizing both flat surfaced objects (e.g. cartons, crates, pallets), and irregularly shaped objects, (e.g. pipe, tubing, bails, etc.).

    To View All Available Sizes, Please Click Link

  • Manual Feed Wheel Tensioner

    To View All Available Sizes, Please Click Link

  • TGT-180 Light Duty Strap Tensioning Tool with Cutter

    Light duty, tool tensions and cuts polypropylene and fibre strapping when used with wire buckles.

    To View All Available Sizes, Please Click Link

  • Ideal Tridon® Worm Gear Lined 53-0 Hose Clamps

    Lined clamps are designed for use with silicone rubber and other soft hose applications. The liner protects the hose surface and prevents it from extruding or shearing through the band notches as the clamp is tightened.

    To View All Available Sizes, Please Click Link

  • Type 201 and 316 Stainless Steel Tiger Teeth Buckles

    Type 201 stainless steel buckles are suitable for use in general banding applications. Type 316 stainless steel buckles are suitable for banding applications in marine and other corrosive environments.

    To View All Available Sizes, Please Click Link

  • Type 201 Stainless Steel Heavy Duty Tiger Teeth Buckles

    Type 201 heavy duty stainless steel buckles are suitable for use in heavy duty general banding applications.

    To View All Available Sizes, Please Click Link

  • Type 304 and 316 Stainless Steel Wing Strap Seals

    Type 304 stainless steel wing seals are suitable for general bundling and fastening. Type 316 stainless steel wing seals are suitable for bundling and fastening in marine and other corrosive environments. Use wing seals to fasten coated banding and for light to medium duty applications.

    To View All Available Sizes, Please Click Link

  • Ideal Tridon® Worm Gear 1/2 Inch (in) Hy-Gear® 57-0 Hose Clamps

    1/2" Hy-Gear® 57-0 is a part-stainless general purpose hose clamp suitable for common home and auto applications.

    To View All Available Sizes, Please Click Link

  • WP200 Galvanized Wall Mounting Plates

    Extra strong, galvanized steel wall mounting plates are suitable for fastening cables, pipe and conduit to flat surfaces using stainless steel cable ties or stainless steel banding. Cable or pipe can be replaced without removing the WP200 wall plate from the wall.

    To View All Available Sizes, Please Click Link

  • Ideal Tridon® Snaplock® 58-0 Hose Clamps

    Snaplock Quick Release worm drive clamps are good for closed system applications where the clamp must be disengaged to be applied. The swivel-action locking of screw to band makes installation and removal much faster.

    Applications include general purpose, mild-corrosive environments, cable bundling and hanging of light weight signs.

    To View All Available Sizes, Please Click Link

  • HCL Smart® Manual Type, Installation Tool for 7 and 10 Millimeter (mm) Band Width

    To View All Available Sizes, Please Click Link

  • HCL Smart® Band Standard and Hybrid Buckles

    To View All Available Sizes, Please Click Link

  • HCL Smart® Band

    HCL Smart® Band is a Glass Fibre Yarn reinforced Polymer Banding system and is available in a variety of materials. PA66 is suitable for temporary and permanent general banding e.g. fastening signs to poles, columns, pillars or beams. POM is very commonly used in the Marine industry and PA12 is an alternative to high grade corrosion resistant metals, e.g. Inconel, Monel and Titanium.

    To View All Available Sizes, Please Click Link

  • HCL Smart® Band Compact

    Glass-filled 32 mm [1 ¼”] wide band in specified lengths with new over-moulded compact buckle – adding over 10% to the performance of the Hybrid system Suitable for heavy duty applications in subsea and subterranean environments

    To View All Available Sizes, Please Click Link

  • HCL Smart® Protectors

    To View All Available Sizes, Please Click Link

  • HCL Smart® 20 Millimeter (mm) 3/4 Inch (in) Width Cable Ties

    Heavy-duty polymer cable tie used in onshore and offshore hydrocarbon extraction operations and other demanding applications.

    To View All Available Sizes, Please Click Link

  • HCL Smart® 32 Millimeter (mm) 1-1/4 Inch (in) Width Cable Ties

    Extra Heavy-Duty polymer cable tie used in onshore and offshore hydrocarbon extraction operations and other demanding applications.

    To View All Available Sizes, Please Click Link